Zebra hardware scanner configuration

User profiles for configuration

When using an Android device with multiple profiles, the configurations on this page must be done with the same profile for which the application is installed.

One profile must be configured per used fulfillmenttools application in DataWedge (e.g., Operations and Inventory).

Activate Hardware Scanner

Zebra devices with hardware scanners have a app called DataWedge which is responsible for connecting the hardware scanner to our apps.

1. Select DataWedge from the app drawer

2. Tap on the 3-dot-menu in the top right corner

3. Select “New Profile”

4. Enter a profile name (e.g. fulfillmenttoolsapp if you use the fulfillment app or inventoryapp if you use the inventory app)

5. Tap on “Connected Apps”

6. Top on the 3-dot-menu in the top right corner and select “New Application/Activity”

7. Select com.ocfulfillment.fulfillmentapp if you want to configure for the fulfillment app or com.ocfulfillment.inventoryapp if you configure the inventory app

8. Select “*” (the top in the list)

9. Scroll to “Intent-Output”

10. Check the checkbox on “Enabled”

11. Enter com.ocfulfillment.fulfillmentapp.ACTION for the fulfillmentapp or com.ocfulfillment.inventoryapp.ACTION for the inventory app

12. Select “Broadcast intent” in “Intent delivery”

Supported Barcodes

• GS1 DataBar (DataBar-14)

• GS1 DataBar Stacked

• GS1 DataBar Stacked Omnidirectional

• GS1 DataBar Limited

• GS1 DataBar Expanded

• GS1 DataBar Expanded Stacked

• GS1 128 Composite Symbologie

• GS1 Databar Composite Symbologie

• GS1 Databar Stacked Composite Symbologie

• GS1 Databar Stacked Omni Composite Symbologie

• GS1 Databar Limited Composite Symbologie

• GS1 Databar Expanded Composite Symbologie

• GS1 Databar Expanded Stacked Composite Symbologie

• EAN-8 Composite Symbologie

• EAN-13 Composite Symbologie

• QR-Code

• Data Matrix

• Code-128

• UPC-A

• UPC-E

• 2 of 5 Interleaved